CDPHL - MICROGRADED ALUNDUM
- MSDS: CDPHL
- Manufacturer: JOHN CRANE INC
- Product Name: MICROGRADED ALUNDUM
- National Stock Number: 5310-00-853-5635
Product Identification
Product ID:MICROGRADED ALUNDUM
MSDS Date:04/03/1995
FSC:5310
NIIN:00-853-5635
MSDS Number: CDPHL
Responsible Party
MORTON GROVE, IL 60053-2725
US
Emergency Phone: 708-967-2400
Info Phone: 708-967-2400
Cage: 5F893
Contractor
Telephone: 708-967-2400/2879
Cage: 71724
Ingredients
ALUMINUM OXIDE (SARA 313)
CAS: 1344-28-1
RTECS: BD1200000
Fraction By Weight: 96-100%
OSHA PEL 10 MG/M3
ACGIH TLV: 10 MG/M3
TITANIA
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 0-4.0%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: COUGHING, SHORTNESS OF BREATH.
SKIN: ABRASIONS. EYE: IRRIT. CHRONIC: MAY EFFECT BREATHING
CAPACITY.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR, GIVE ARTIF RESP, GET MED AID.
INGEST: GET MED AID. SKIN: GET MED AID. EYE: WASH W/LARGE AMOUNTS
OF WATER, GET MED AID.
Fire Fighting
Flash Point:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:NA
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:NORMAL CLEANUP PROCEDURES, RESPIRATORS MAY BE
REQUIRED.
Handling
Handling and Storage Precautions:HANDLE W/ADEQUATE VENT FOR NUISSANCE
DUST.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:APPROVED DUST RESPIRATOR AS NEEDED.
Ventilation:LOCAL RECOMMENDED, MECHANICAL/GENERAL RECOMMENDED
Protective Gloves:AS DESIRED.
Eye Protection:RECOMMENDED.
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:3452F,1900C
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:3.9
Evaporation Rate & Reference:NA
Solubility in Water:NONE
Appearance and Odor:GRANULAR, GRAY-BROWN TO RED-BROWN, NO ODOR.
Percent Volatiles by Volume:NA
Stability
Stability Indicator/Materials to Avoid:YES
NK
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:STANDARD LANDFILL METHODS CONSISTENT
W/APPLICABLE FEDERAL/STATE/LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.